发表论文

1. Ling, D., Wang, D., Wang P., Guo, X., Liu, L., He, B.; Hu, L.; Jiang, G., Life cycle assessment of 3D printing for precision analytical instrument components: Carbon emission reduction potential in ICP-MS spray chamber manufacturing, ACS Sustainable Resour. Manage., 2025, 2, 9, 1731–1741

2. Wang, A.; Gao, Y.; Li, Y.; Liu, N.; Gao, J.; Wang, H.; Sun, J.; Tao, C.; Meng, F.; Hu, L., Exhaled breath condensates for identifying brain disease-specific metabolites of potential biomarkers: Taking Parkinson's disease as an example, Chem. Eng. J., 2025, 522, 167565 

3. Li, Y.; Tian, X.; Feng, Y.; Yuan, G.; Guo, X.; Wang, D.; He, B.; Hu, L.; Jiang, G., Assembling in 3D printing: functions and applications, Int. J. Adv. Manuf. Technol., 2025, 138(11):5123-5135

4. Wang, D.; Zhang, J.; Fan, C.; Li, X.; Liu, L.; Yan, X.; Li, Y.; He, B.; Yin, Y.; Hu, L.; Jiang, G., Particle Trajectory Simulation Facilitates the Development of an Efficient Sample Introduction System for Single-Particle ICP-MS Analysis. Anal. Chem., 2025, 97 (3), 1792-1798.

5. Tian, H.; Guo, H.; Zhang, H.; Zhang, T.; Tang, Y.; Ye, Z.; Zhang, J.; Yuan, G.; Zhou, Q.; Li, Y.; Tao, C.; Wang, D.; Liu, J.; He, B.; Yin, Y.; Liu, L.; Shi, J.; Hu, L.; Jiang, G., Toxicity of stereolithography 3D printed objects at the chemical level and strategies to improve biocompatibility, Addit. Manuf., 2025, 101, 104715

6. Zhu, W.; Huo, F.; Cao, L.; Li, Z.; Zhu, Q.; He, R.; Chen, B.; Liang, Y.; Cai, B.; He, H.; Bu, L.; Hu, L., Two-photon polymerization 3D printing of biomimetic microstructures for functionalizing surfaces to inhibit bacterial growth, Chem. Eng. J., 2025, 511, 161907

7. Zhang, J.; Li, Y.; He, B.; Zhang, T.; Yang, B.; Yu, W.; Hu, L.; Jiang, G., 3D-printed flexible thermoplastic polyurethane membrane for ultrafast oil/ water separation, Chem. Eng. J., 2025, 503, 158500

8. Guo, X.; Wang, D.; Guo, Y.; Zhang, J.; Li, Y.; Tian, H.; Liu, L.; Liang, Y.; Yin, Y.; He, B.; Hu, L.; Jiang, G., Droplet-based bioprinting for the tailored fabrication of bacteria-laden living materials. Bioprocess. Biosyst. Eng., 2025, 48 (2), 261-273.

9. Wang, D.; Ling, D.; Lin, W.; Wang, K.; Feng, Y.; Liu, L.; Yin, Y.; Hu, L.; Huang, X.; Jiang, G., Potential and Challenges of 3D Printing Technology in Membrane-Based Water Treatment Research. ACS ES&T Water, 2024, 4 (9), 3619-3622

10. Guo, X., Wang, D., He, B.; Hu, L.; Jiang, G., 3D bioprinting of cultured meat: A promising avenue of meat production, Food Bioprocess. Tech., 2023, 17(7):1-22

11. Zhang, J.; Wang, D.; Li, Y.; Liu, L.; Liang, Y.; He, B.; Hu, L.; Jiang, G., Application of three-dimensional printing technology in environmental analysis: A review. Anal. Chim. Acta, 2023, 1281

12. Wang, D.; Zhang, T.; Guo, X.; Ling, D.; Hu, L.; Jiang, G., The potential of 3D printing in facilitating carbon neutrality. J. Environ. Sci., 2023, 130, 85-91

13. Wang, D.; Zhi, T.; Liu, L.; Yan, L.; Yan, W.; Tang, Y.; He, B.; Hu, L.; Jing, C.; Jiang, G., 3D printing of TiO2 nano particles containing macrostructures for As(III) removal in water. Sci. Total Environ., 2022, 815

14. Lin, W., Wang Q., Sun. L., Wang, D., Cabrera, J., Li, D., Hu, L., Jiang G., Wang, X., Huang, X., The critical role of feed spacer channel porosity in membrane biofouling: Insights and implications, J. Mem. Sci., 2022, 649,120395

15. Min, K.; Li, Y.; Wang, D.; Chen, B.; Ma, M.; Hu, L.; Liu, Q.; Jiang, G., 3D printing-induced fine particle and volatile organic compound emission: An emerging health risk. Environ. Sci. Technol. Lett., 2021, 8 (8), 616-625

16. Li, Y.; Wang, D.; Nong, Q.; Liu, L.; Zhang, M.; Lang, Y.; Hu, L.; He, B.; Jiang, G., 3D printed portable gel electrophoresis device for rapid detection of proteins. Chin. J. Chromatogr., 2020, 38 (11), 1316-1322

17. Huang, X.; Wang, D.; He, B.; Liu, Q.; Hu, L.; Jiang, G., A 3D-printed modularized purification system for rapid, high-throughput MALDI-MS analysis of small-volume biological samples. Chem. Commun. 2020, 56 (11), 1637-1640

18. Wang, D.; Zhang, J.; Liu, Q.; Chen, B.; Liang, Y.; Hu, L.; Jiang, G., 3D Printing Challenges in Enabling Rapid Response to Public Health Emergencies. Innovation 2020, 1 (3)

19. Wang, D.; He, B.; Yan, X.; Nong, Q.; Wang, C.; Jiang, J.; Hu, L.; Jiang, G., 3D printed gel electrophoresis device coupling with ICP-MS for online separation and detection of metalloproteins. Talanta 2019, 197, 145-150

20. Yan X., He B., Wang D., Hu L., Liu L., Liao C., Jiang G.. Two-dimensional (Weak Anion Exchange Chromatography-Gel Electrophoresis) Separations Coupling to Inductively Coupled Plasma Mass Spectrometry Strategy for Analysis of Metalloproteins. Talanta, 2018, 184, 404-410

21. Wang, D.; Huang, X.; Li, J.; He, B.; Liu, Q.; Hu, L.; Jiang, G., 3D printing of graphene-doped target for "matrix-free'' laser desorption/ionization mass spectrometry. Chem. Commun. 2018, 54 (22), 2723-2726

22. Hu L., Liu L., Liao C., Jiang G., 3D Printing Techniques in Environmental Science and Engineering Will Bring New Innovation, Environ. Sci. Technol., 2017, 51(7): 3597-3599 

授权专利

(a). 发明专利（10项）

1. 胡立刚、陶晨、江桂斌，面罩型呼吸采样器及呼吸测试面罩，CN202110477662.8，发明专利

2. 胡立刚、陶晨、江桂斌，血桥限位器，CN202110343859.2，发明专利

3. 胡立刚、陶晨、江桂斌，呼气代谢测定系统，CN202110213588.9，发明专利

4. 胡立刚、王丁一、任志华、梁杰锋、周群芳、何滨、江桂斌，用于模式鱼类胚胎培养及观测的装置和方法，CN202010764739.5，发明专利

5. 刘倩、黄秀、王丁一、胡立刚、江桂斌，用于高通量质谱检测的多功能模块化样品前处理器件及其使用方法，CN201811410368.X，发明专利

6. 胡立刚、王丁一、黄秀、刘倩、何滨、江桂斌，基质辅助激光解吸‑串联飞行时间质谱仪靶板，CN201710371403.0，发明专利

7. 何滨、王丁一、严雪婷、胡立刚、江桂斌，用于蛋白分离的电泳槽及采用其的柱状凝胶电泳装置，CN201611101526.4，发明专利

8. 何滨、王丁一、严雪婷、胡立刚、江桂斌，用于蛋白分离的水平柱状凝胶电泳装置，CN201611101473.6，发明专利

9. 何滨、王丁一、严雪婷、胡立刚、江桂斌，用于蛋白分离的洗脱装置及采用其的柱状凝胶电泳装置，CN201611101565.4，发明专利

10. 胡立刚、王丁一、严雪婷、何滨、江桂斌，雾化室、采用其的进样系统和ICP‑MS，CN201610227306.X，发明专利

(b). 实用新型专利（11项）

1. 胡立刚、李莹莹、冯煜康、田然、郭华、何滨、江桂斌，用于高基质样品检测的雾化器，CN202422040828.1，实用新型专利

2. 胡立刚、张俊鹏、何滨、江桂斌，一种用于面投影微立体光刻的树脂槽及包含其的3D打印系统，CN202322991830.2，实用新型专利

3. 胡立刚、张俊鹏、何滨、江桂斌，一种用于MALDI‑TOF‑MS的可拆卸靶板，CN202322884585.5，实用新型专利

4. 王丁一、张俊辉、刘丽红、胡立刚、江桂斌，一种用于非均一样品分析的ICP‑MS雾化室，CN202321015354.4，实用新型专利

5. 王丁一、张俊辉、刘丽红、胡立刚、江桂斌，用于ICP‑MS的可即抛型雾化器，CN202320600499.4，实用新型专利

6. 胡立刚、袁郭龙、张亭亭、郭华、田皓中、王丁一、江桂斌，蛋白质凝胶洗脱接口及电泳装置，CN202222504638.1，实用新型专利

7. 胡立刚、王丁一、张亭亭、何滨、江桂斌，一种一体式质谱四极杆，CN202221572113.5，实用新型专利

8. 胡立刚、王丁一、张亭亭、何滨、江桂斌，一种用于单细胞ICP‑MS分析的雾化器，CN202221153704.9，实用新型专利

9. 胡立刚、李莹莹、王丁一、何滨、江桂斌，金属蛋白分析系统，CN202020409681.8，实用新型专利

10. 胡立刚、李莹莹、王丁一、何滨、江桂斌，用于单细胞分析的电感耦合等离子体质谱进样系统，CN202020409667.8，实用新型专利

11. 傅建捷、傅科涵、王丁一、胡立刚、张爱茜、江桂斌，用于水体中有机污染物的新型采样系统，CN202122095281.1，实用新型专利

(c). 外观专利（2项）

1. 胡立刚、王丁一、李莹莹、何滨、江桂斌，水平柱状凝胶电泳槽，CN202030108015.6，外观专利

2. 胡立刚、王丁一、李莹莹、何滨、江桂斌，雾化室，CN202030108014.1，外观专利